Ryobi RBV-2200 Manuel D'utilisation page 14

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
GB
F
D
E
SPECIFIC SAFETY RULES
Do not abuse the power cord. Never carry the product
by the cord. Never pull the plug out of the power point
by the cord. Keep the cord away from heat, oil and
sharp edges.
For outdoors work use only suitably approved
extension cables with a min. conductor cross section
of 1.5 mm
2
. The plug connectors must have earthing
contacts and be rain-water-proof.
Inspect extension cords for deterioration, cuts or
cracks in the insulation. Repair or replace the cords if
any defects appear.
A nameplate on the product indicates the unit's
voltage. Never connect the product to an AC voltage
that differs from this voltage.
If the power cord or extension cable becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
Electrical power should be supplied via a Residual
Current Device (RCD) with a tripping current of not
more than 30 mA.
To prevent electric shock, avoid contact with earthed
parts.
Only plug in when the machine is switched off.
Hold the machine firmly in both hands when working
with it.
If the power cord is damaged, have it replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid any hazards.
MAINTENANCE RULES
Maintain the product with care. Follow instructions for
changing accessories. Keep the product dry,
clean and free from oil and grease.
Unplug the product before making adjustments or
repairs.
Do not use the product if parts have been damaged.
Check the product regularly to make sure that it will
operate properly and perform the intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts and any other
condition that may affect the unit operation. Inspect
the unit's power connection. Any part that is damaged
should be properly repaired or replaced by a Ryobi
authorised service centre.
Keep the product clean of grass clippings and other
materials that may become lodged in the cutting lines
and air vents.
I
P
NL
S
DK
N
FIN GR HU
CZ RU
English
Never douse or squirt the product with water or any
other liquid. Do not use detergents or solvents.
Keep handles dry, clean and free from debris.
After each use, clean with a soft, dry cloth.
SERVICE RULES
Service on this product must be performed by
qualified repair personnel only. Service or
maintenance performed by unqualified personnel
could result in injury to the user and/or damage to the
product. Such service may also void your warranty.
Use only identical replacement parts when servicing
the product. Follow the instructions in the
Maintenance section of this manual. Use of
unauthorised parts or failure to follow maintenance
instructions may create a risk of shock, serious injury
to the user and/or damage to the product. Such use
may also void your warranty.
STORAGE AND TRANSPORTATION RULES
Store the product inside in a dry place.
Store the product up high or lock it up to prevent
unauthorised use or damage. Keep the product out of
the reach of children.
Secure the product when transporting it.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this product.
If you loan someone this product, loan these
instructions also.
8
RO PL SLO HR TR EST LT
WARNING
Before carrying out any maintenance operations,
cut off the electric power supply by disconnecting
the plug from the mains.
LV
SK BG

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rbv-2400vp

Table des Matières