How To Fill A Syringe - PDS 7000 ET ETC Série Manuel De L'utilisateur

FILLING
FILLING THE SYRINGES
The following paragraphs will explain you how to use your dispenser. In order to
achieve this/ to do so, you will have to charge a syringe in the dispenser. Please
review the different instructions before charging your syringe.
Recommendation : Don't fill completely the syringe. The maximum filling has to be
the two-third of the syringe.
THE POURING OF FLUIDS AND SELF-
LEVELLING LIQUIDS
Remove the cap and fill the syringe using a funnel.
Put in the DRIPFLOW plunger and press carefully
until the cap touches the fluid.
Plunger DripFlow
CONSISTING FLUIDS (THICK AND FLATS)
If the fluid is packaged in a 310ml cartridge, try to
fill the syringe with a pressurized cartridge or with
a spatula. Follow this filling by inserting a plunger
(smooth sections) and press the plunger on the
syringe in order to reach the bottom of the syringe
and allow the air to escape.
Maximum filling:
two-third of the syringe
70