PDS 7000 ET ETC Série Manuel De L'utilisateur page 56

The pneumatic dispenser 200 ETC offers 4 programs :
1. The «Manual»
The «manual» or manual mode allows you to make deposits in time pressure,
pressing the pedal (or sending an external contact ex: PLC) triggers the cycle which
continues as long as the pedal is not released ( or the external contact did not stop).
This mode is often favoured for the realization of depositing with the «judged» or of
cordons to judge or of removal of cord led by an external contact.
a. Press the touch «Mode» to navigate between the modes until you switch on
select the «Manual» mode.
b. Press the button «Shot», this button has the same functions as the pedal and
therefore allows manual removal.
2. The «Timer»
The «Timer» mode is used to give out a fixed and defined quantity of medium at a
selected speed (.in cc/s).
Pressing the pedal starts the dispensing process even if not held.
This mode is used for calibrated and repeated shots.
56
mode :
mode :