Programmes Table - Zanussi ZWY 1100 Notice D'utilisation

Start of the programme
Press the "Start/Pause" button to start the cy-
cle. The corresponding light will come on
green. It is normal for the programme selector
to remain stationary during the cycle. The light
corresponding to the current cycle is illumina-
ted.
+ : Prewash + Wash
+ : Rinses + Spin
: End of cycle
The drain pump can operate for a short
time when the appliance fills water.
Interrupting a programme
Adding washing during the first 10 mi-
nutes
Press the "Start/Pause"
corresponding light will flash green while the
appliance is paused. The lid can only be
opened around 2 minutes after the washing
machine has come to a stop. Press the "Start/
Pause" pushbutton again to continue the
programme.

Programmes table

Programme / Type of washing
Cotton (cold - 90°) : White or colour, e.g.
normally soiled work clothes, bed linen, table lin-
en, body linen, towels.
1)
Eco ( -
normally soiled work clothes, bed linen, table lin-
en, body linen, towels.
Synthetics (cold - 60°) : Synthetic fabrics,
body linen,fab, coloured farics, non-iron shirts,
blouses.
Delicates (30° - 40°) : For all delicate ma-
terials, for example curtains.
Wool (30° - 40°) : Machine washable wool
carrying the labels "pure new wool, machine
washable, does not shrink".
Mix 20° : Highly energy efficient cold wash
programme for lightly soiled laundry. This pro-
gramme requires a detergent which is active in
cold water.
www.zanussi.com
pushbutton : the
) : White or colour, e.g.
Modifying the programme in progress
Before making any changes to the current pro-
gramme, you need to pause the washing ma-
chine by pressing the "Start/Pause"
button. If the modification is not possible, the
"Start/Pause"
few seconds. If you still decide to change the
programme, you must cancel the current pro-
gramme (see below).
Cancelling the programme
If you want to cancel the programme, turn the
programme selector to the "Stop" position
End of the programme
The washing machine stops automatically, the
"Start/Pause"
light "End of cycle"
only be opened around 2 minutes after the
washing machine has come to a stop. Turn the
programme selector to the "Stop" position
Remove washing. Unplug and close water inlet
tap.
Load
5,0 kg Prewash, Super quick, Rinse plus, Rinse
hold
5,0 kg Prewash, Rinse plus, Rinse hold
2,5 kg Prewash, Super quick, Rinse plus, Rinse
hold
2,5 kg Prewash, Super quick, Rinse plus, Rinse
hold
1,0 kg Rinse hold
3,0 kg Rinse plus, Rinse hold
pushbutton flashes red for a
pushbutton goes out and the
comes on. The lid can
Possible options
push-
.
.
7