Environment Concerns - Zanussi ZWY 1100 Notice D'utilisation

Keep the transit bolts
for when you move
the appliance.
Water supply
90 90 90
O O O
In case of necessity
move the inlet hose
in the direction
shown on picture. To
make this loose the
inlet hose ring nut
and position the inlet
hose downwards as
drawn on picture.
Tighten the ring nut
back and make sure
there are no leaks.
Drainage
Fit the U-piece on the
drainage hose. Place
everything in a drain-
age point (or in a sink)
at a height of between
70 and 100 cm. En-
sure it is positioned
securely. Air must be
able to enter the end of
the hose, to avoid any risk of siphoning.

Environment concerns

Recycle the materials with the symbol
the packaging in applicable containers to
recycle it.
Help protect the environment and human
health and to recycle waste of electrical and
14
To install the appli-
ance at the same lev-
el as neighboring fur-
niture, cut these
plastic pieces.
Open the water inlet
tap. Check there are
no leaks. The water
inlet hose can not be
extended. If it is too
short, please contact
the after-sales serv-
ice.
Note ! Check if the
water connections
are tight.
min
max
70 cm
100 cm
. Put
The drain hose must never be stretched. If it is
too short, contact an engineer.
Electrical connection
This washing machine must only be connected
in single-phased 220-230 V. Check the fuse
size: 10 A for 220-230 V. The appliance must
not be connected with an extension lead or
multi-plug adaptor. Ensure that the plug is
earthed and that it is in accordance with cur-
rent regulations.
Positioning
Position the appliance on a flat and hard sur-
face in a ventilated location. Ensure the appli-
ance does not come into contact with the wall
or other furniture. Accurate levelling avoids vi-
brations, noise and prevents the appliance
from moving when running.
electronic appliances. Do not dispose
appliances marked with the symbol
household waste. Return the product to your
local recycling facility or contact your
municipal office.
with the
www.zanussi.com