Technical Data; Installation - ZANKER ZKK 8416 K Notice D'utilisation

Technical data

Dimension of the recess
Rising Time
The technical information are situated in the rating
plate on the internal left side of the appliance and in
the energy label.

Installation

Caution! Read the "Safety Information"
carefully for your safety and correct operation of
the appliance before installing the appliance.
Positioning
Install this appliance at a location where the ambient
temperature corresponds to the climate class indica-
ted on the rating plate of the appliance:
Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Electrical connection
Before plugging in, ensure that the voltage and fre-
quency shown on the rating plate correspond to your
domestic power supply.
Height
Width
Depth
The appliance must be earthed. The power supply ca-
ble plug is provided with a contact for this purpose. If
the domestic power supply socket is not earthed, con-
nect the appliance to a separate earth in compliance
with current regulations, consulting a qualified electri-
cian.
The manufacturer declines all responsibility if the
above safety precautions are not observed.
This appliance complies with the E.E.C. Directives.
Door reversibility
The door of the appliance opens to the right. If you
want to open the door to the left, do these steps be-
fore you install the appliance:
1580 mm
560 mm
550 mm
20 h
23