ZANKER ZKK 8416 K Notice D'utilisation page 24

• Loosen the upper pin
and remove the
spacer.
• Remove the upper pin
and the upper door.
Ventilation requirements
The airflow behind the
appliance must be suffi-
cient.
24
• Loosen the middle
hinge.
min.
50 mm
2
200 cm
min.
200 cm 2
• Remove the lower
door.
• Loosen the lower pin.
Installing the appliance
Caution! Make sure that the mains cable can
move freely.
Do the following steps:
On the opposite side:
• Install the lower pin.
• Install the lower door.
• Tighten the middle
hinge.
• Install the upper door.
• Tighten the spacer
and tighten the upper
pin.