Assembly; Accessories - Panasonic EY7430 Instructions D'utilisation

II. ASSEMBLY
EN
Attaching or Removing Battery Pack
【 Fig.9 】
1. To insert the battery pack:
Align the battery pack to the bottom of
the handle and push the battery pack in
to attach it. Ensure it clicks in place.
2. To remove the battery pack:
Press the battery pack release button
and pull the battery pack from the main
body.
NOTE:
Use under extremely hot or cold condi-
tions will reduce operating capacity per
charge.
III. ACCESSORIES
Battery Pack
• See the Specification.
NOTE:
Insert the battery pack firmly into the
tool. After inserting, check to make
sure that it will not come loose.
• Safety Control
The battery pack (EY9L32) has
individual monitoring sensor of battery
cell voltage to ensure optimal charge
control, preventing overcharging for
safety.
[Battery Pack]
For Appropriate Use of Battery Pack
Li-ion Battery Pack
• For optimum battery life, store the Li-
ion battery pack following use without
charging it.
• When charging the battery pack,
confirm that the terminals on the
battery charger are free of foreign
substances such as dust and water
etc. Clean the terminals before
charging the battery pack if any
foreign substances are found on the
terminals. The life of the battery pack
terminals may be affected by foreign
substances such as dust and water
etc. during operation.
• When battery pack is not in use,
keep it away from other metal objects
like: paper clips, coins, keys, nails,
screws, or other small metal objects
that can make a connection from one
terminal to another.
Shorting the battery terminals
EY7530_7430_3732_0L32_02(Eng).indd
- 20 -
20
together may cause sparks, burns or
a fire.
• When operating the battery pack,
make sure the work place is well
ventilated.
• When the battery pack is removed
from the main body of the tool,
replace the battery pack cover
immediately in order to prevent dust
or dirt from contaminating the battery
terminals and causing a short circuit.
• If liquid leaks from the battery, do not
touch it with your bare hands. Follow
these procedures.
• Battery fluid in the eyes can cause
blindness. If the fluid gets on your
hands, do not rub your eyes. Wash
them immediately in clean water, then
consult a doctor.
• Battery fluid can cause inflammation
if it gets on your skin or clothing.
Wash thoroughly in clean water, then
consult a doctor.
• Do not use a battery pack that is
leaking fluid. Stop use immediately,
keep it away from fire, and contact
the retailer as soon as possible.
• Do not use a battery pack that has
been modified. This includes battery
packs that have been opened and
had parts replaced.
• Do not take apart, modify or strike the
battery pack. Do not attempt to insert
a nail into it.
• The rage of operating temperature for
the lithium-ion battery pack (EY9L32)
is between -20 °C ~ 70 °C.
• If you use the battery pack as it is to
cold below -20 °C without warming
it, in a cold area, the body does not
operate normally.
In that case, leave it for 1 hour or
more in a location with more than
10 °C in order to raise the temperature
of the battery pack before use, please
use after once the temperature of
battery pack has raised.
• The battery pack (EY9L32) must
only be charged with the Panasonic
charger (EY0L32).
• Please check whether there is trash
attached to the contact part of the
battery pack and body.
• Do not touch the battery terminals just
after operation. It could be heated, so
there is a risk of burns.
2014/08/18 15:40:54