Recording - Abus CASA20550 Manuel Utilisateur

12. Recording

The recording section allows you to set up recordings with the option of setting up permanent video
recordings for network shares. You can save up to 2 video settings in the network camera.
Click "Add" to create a new recording.
Destination: "Network drive"
"Recording name" A unique name for a recording entry.
"Enable this recording" Select this option to activate the recording entry.
"Priority" Recordings with a higher priority are executed first.
"Source" The recording can be made from video streams 1-4.
"Schedule" The recording schedule is used.
"Sun" – "Sat" allows you to select the day of the week for a recording.
"Always" Activates the recording at all times.
"From" – "to" The recording times are restricted.
"Destination" Network folder.
"Entire free space" The maximum amount of space on the destination storage medium is used.
"Reserved space" Defines how many MB of free memory space should be reserved.
"Enable cyclic recording" Activates the cyclic recording function. If the set value is reached during the data
recording, the oldest data is overwritten.
For more detailed information about "Create folders automatically", refer to
section "13.4 Action".
If the "Customized folder" option is enabled, the cyclic recording function cannot be used.
Recording overview
"Name (video)" Opens the recording configuration page.
"Status (ON)" Sets the recording status to ON or OFF.
"Destination" Opens a file list with the saved recordings.
90
English