Application; Trigger Settings - Abus CASA20550 Manuel Utilisateur

English

11. Application

This allows you to automate tasks in the network camera. The application configuration comprises 3 sections:
event, server and medium. A typical application example may look like the following: due to motion detection
(event), an email (server) with an alarm picture (medium) is sent to a user.
Event setup
Click "Add" to create a new event. Up to 3 events can be set.
"Event name" Assign a unique name to the event, under which the event configuration is to be saved
"Enable this event" Select this option to activate the programmed result.
"Priority" Events with higher priority are completed first
"Detect next event after" Time between events to be executed (e.g.: with motion detection)

11.6 Trigger settings

"Video motion detection" Activate the desired motion window.
"Periodically" The event is triggered periodically. Maximum setting is 999 minutes.
"System boot" Event is triggered when the system is rebooted (after a power failure).
"Recording notify" If the destination storage (medium) is full or if a cyclic recording is overwritten, an alarm
is triggered.
85