Cd Changer Operations - Clarion DUZ388RMP Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 43
DUZ388RMP_EN.book Page 36 Monday, November 26, 2007 9:56 AM

CD Changer Operations

Note:
• The following operations are the same as for CD
mode:
∗Pause
∗Track selection
∗Fast-forward/fast-backward
∗Scan play
∗Repeat play
∗Random play
See "CD/MP3/WMA/AAC Operations" (page 21-
24) for details.
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Press the [SRC] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [SRC] button to select
the CD changer for play.
∗ If "NO MAG" appears in the display, insert the
magazine into the CD changer. "D-CHECK"
appears in the display while the player loads
(checks) the magazine.
∗ If "NO DISC" appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
CAUTION
CD-ROM discs cannot be played from every
CD changer, it's depended on the model.
36
DUZ388RMP
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to DCZ628.
1. Press the [DISP] button to change the title
display.
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, "NO TITLE" appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, "NO TITLE" appears in the display.
Procedure to scroll a title
Set "SCROLL" to "ON" or "OFF".
(The factory default setting is "ON". Refer to the
subsection "Setting the method for title scroll"
in section "Operations Common to Each
Mode".)
● When set to "ON"
The title is automatically kept scrolling.
● When set to "OFF"
To scroll just 1 time.
When you want to see the title again, in the title
mode, press and hold the [DISP] button for 3
seconds or longer to scroll the title.
Selecting a CD
1. Press the [w] or [z] button to select the
desired disc.
∗ If a CD is not loaded in a slot of magazine,
pressing the [w] or [z] button can not work.

Publicité

Table des Matières
loading

Table des Matières