Clarion DUZ388RMP Mode D'emploi page 14

DUZ388RMP_EN.book Page 14 Monday, November 26, 2007 9:56 AM
Basic Operations
● Adjusting the balance
2-1. Select "BALANCE".
3-1. Press the [w] or [z] button to adjust the
balance of the right and left speakers.
∗ The factory default setting is "CENTER"
(center). (Adjustment range: RIGHT12 to
LEFT12 (right 12 to left 12))
● Adjusting the fader
2-1. Select "FADER".
3-1. Press the [w] or [z] button to adjust the
balance of the rear and front speakers.
∗ The factory default setting is "CENTER"
(center). (Adjustment range: FRONT12 to
REAR12 (front 12 to rear 12))
Note:
• During SOUND adjustment mode, if no
operation is performed for more than 10
seconds, this mode can be cancelled and return
to previous mode.
Setting the MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low frequencies like the normal sound
adjustment function, but emphasizes the deep
bass frequencies to provide you with a dynamic
sound.
∗ The factory default setting is "OFF" (off).
1. Press and hold the [ ] button for 1 second
or longer to turn on the MAGNA BASS
EXTEND effect. "M-B EX ON" appears in the
display for 2 seconds.
2. Press and hold the [ ] button for 1 second
or longer to turn off the MAGNA BASS
EXTEND effect. "M-B EX OFF" appears in
the display for 2 seconds.
14
DUZ388RMP
CT (Clock Time) function
The CT function receives CT data sent from an
RDS station and displays the time.
∗ If a CT data is not being received, "CT– –:– –"
appears in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.