Wall Mounting The E-Socket - alfen E-Socket Guide D'installation Rapide

Wall mounting the E-Socket

Preparing for installation
1 Determine the position of the E-Socket.
Take into account the length of the E-Socket
cable. Take special care to measure the piece of
cable needed inside the Eve charging station.
Please refer to page 16 and 17 on how to install
the E-socket on the charging station.
2 Remove the four (4) philips head screws to
open the front cover with socket of the E-
Socket.
Leave the front cover with socket hanging.
Take care not to damage the cables.
3 Mark the four (4) wall plug positions.
4 Mount the E-Socket on the wall.
• Drill 4 holes for the wall plugs and fit the wall
plugs.
• Mount the E-Socket on the wall using the four (4)
wall mounting screws.
Take care not to damage the cables or the E-
Socket front cover with socket; keep them clear
from the drill and other mounting equipment.
5
a) Make sure the socket flap opens in an upward
direction.
b) Use the four philips head screws to close the
front cover with socket.
Take care not to damage the cables; keep them
clear of the front cover while closing so they do
not obstruct it.
6 The E-Socket wall mounted.
Please refer to page 16 and 17 on how to
install the E-socket on the charging station.
en
6
? ?
? ?
1
?
?
2
3
4