Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Mounting the E-Socket on the Eve
Double pole
Preparing for installation
1
Use the proper accessory, mounting material or
kit for installation:
•
Eve Double Pole FR (934459002)
•
E-Socket support. (803873064-ICU).
•
Four (4) pole mount screws. Included in the E-
Socket package content.
2
Mount the E-Socket support on the Eve Double
Pole FR.
•
Fit the E-Socket support cutout in the slots on the
Eve Double Pole FR.
•
Push the E-Socket Support in an upward direction
until the bracket mount screw aligns with the press
nut.
•
Use the bracket mount screw to secure the E-
Socket support.
In this instruction the E-Socket will be mounted
on the right side. This instruction can also be
used for the left side.
3
Remove the four (4) philips head screws to
open the front cover with socket of the E-
Socket.
Leave the front cover with socket hanging.
Take care not to damage the cables.
4
Use the four (4) pole mount screws to mount
the E-Socket on the E-Socket support.
5
Use the four philips head screws to close the
front cover with socket.
Make sure the socket flap opens in an upward
direction.
Take care not to damage the cables; keep them
clear of the socket while closing so they do not
obstruct it.
6
The E-Socket mounted on the Eve Double pole.
Guide the E-Socket cable through the cut-out on
7
the E-Socket support before installing on the
Eve Double.
Please refer to page 17 on how to install the
E-socket on the charging station.
12
Publicité
Chapitres
Table des Matières
