Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Mounting the E-Socket on the Eve
Single Duo pole
Preparing for installation
1
Use the proper accessory, mounting material or
kit for installation:
•
Eve Single Duo-Pole (803873037-ICU)
•
The E-Socket Support Duo-Pole (803873066-ICU).
•
Four (4) washers and nuts. Included in the Eve
Single package content.
•
Four(4) pole mount screws. Included in E-Socket
package content.
Remove the front cover of the Eve Sinle
according to the description on page 16.
2
Mount the Eve Single on the Support Duo-pole
using the four (4) nuts and washers included in
the Eve Single package.
•
Push the Support Duo-pole over the threaded end
on the Eve Single Duo pole.
•
Mount the Eve Single on the same threaded ends of
the Eve Single Duo-pole.
•
Use the four (4) nuts and washers to secure the
Eve single and Support Duo-pole.
3
Mount the second Eve Single charging station
on the Eve Single Duo pole using the four (4)
nuts and washers included in the Eve Single
package.
•
Mount the Eve Single on the same threaded ends of
the Eve Single Duo-pole.
•
Use the four (4) nuts and washers to secure the
Eve single and Support Duo-pole.
4
Remove the four (4) philips head screws to
open the front cover with socket of the E-
Socket.
Leave socket hanging. Take care not to damage
the cables.
5
Use the Support Duo-pole bracket on the right
side of the charging station to mount the E-
Socket.
•
Use de four (4) pole mount screws to mount the E-
Socket on the Support Duo-pole.
6
The socket is positioned upside down.
Make sure the socket flap opens in an upward
direction.
•
Rotate the front cover with socket 180 degrees in
order for the socket flap to open in an upward
direction.
en
7
8
10
Take care not to damage the cables; keep them
clear of the socket while closing so they do not
obstruct it.
Use the four philips head screws to close the
front cover with socket.
Take care not to damage the cables; keep them
clear of the front cover while closing so they do
not obstruct it.
The E-Socket is mounted on the Eve Single Duo-
pole.
Please refer to page 16 on how to install the
E-socket on the charging station.
Publicité
Chapitres
Table des Matières
