pools.
• Please do not insert any objects into the appliance
as this may cause electric shocks, fire or damages
to the appliance.
• Please do not place the heater under or near
curtains, drapes and other flammable materials.
• Please do not leave the appliance unattended.
• Please make sure that the ventilation parts are not
blocked and free from dust or foreign objects.
• Only use the appliance on flat, stable and heat
resistant surfaces.
• Do not place the appliance on a carpet while in use.
• Do not use the appliance to dry towels or clothes.
Risk of fire!
Warning: In order to avoid overheating, do
not cover the heater!
Installation
•
Installation notes:
The appliance can be operated lying on a heat resistant surface or mounted on a wall. Make sure there
are no flammable materials in the immediate surroundings in both cases. If you use the appliance in a
bathroom, the appliance needs to be mounted on the wall. Please make sure there is enough distance
from the appliance to the floor and walls.
•
Wall mounting:
• Please drill two holes into the wall with a diameter of 6mm each and a depth of 29mm. The
distance between both holes should be 74mm.
• Please insert the enclosed dowels into the holes (see picture 1) and fix the wall mount on the wall
with the screws (see picture 2).
Distance appliance to floor:
Distance appliance to side walls:
Distance appliance to water sources:
Picture 1
at least 1m
at least 0,3m
at least 1m
Wall mount
Dowel
Picture 2