Kubota K7563-99360 Manuel D'instructions page 19

[9] Install OIL COOLER ASSY
1. Install OIL COOLER ASSY to MISSION FRAME
COMP with BOLTs (WITH LOCK AND PLAIN
WASHER) (Fig.36, 37)
[Tightening torque: 23.5 to 27.5 N-m (2.4 to 2.8 kgf-m)]
(1) OIL COOLER ASSY <45>
(2) BOLTs (WITH LOCK AND PLAIN WASHER) <46> x 2
(3) MISSION FRAME COMP
(1) OIL COOLER ASSY <45>
(2) BOLTs (WITH LOCK AND PLAIN WASHER) <46> x 2
(3) MISSION FRAME COMP
A CONFIRM ENOUGH CLEARANCE BETWEEN OIL
COOLER ASSY AND PARTS AROUND IT.
A PASS THE HOSES IN FRONT OF THE FAN
SHROUD ("FRONT" means forward direction of
vehicle.) (Fig.38 (A))
* Correctly assembled
2. Install FAN COVER to REAR TM GUARD with
FLANGE BOLTs. (Fig.39)
[Tightening torque: 23.5 to 27.5 N-m (2.4 to 2.8 kgf-m)]
For the models which have the plate for LICENCE
PLATE, install FAN COVER with the plate. (FAN
COVER is upper.)
(1) FAN COVER <47>
(2) FLANGE BOLTs <48> x 2
(3) REAR TM GUARD
(4) PLATE (LICENCE PLATE) (if equipped)
19