Publicité
Les langues disponibles
Les langues disponibles
12
4. Install FITTING (4601-10-10-NWO) to PUMP ASSY
8CC as shown in Fig.17 (angle 45 degrees).
(1) PUMP ASSY 8CC
(2) FITTING (4601-10-10-NWO) <37>
[4] Change AUX. PUMP UNIT (if necessary: target
serial number information is described in the
beginning of this manual)
A BE CAREFUL NOT TO ALLOW DUST OR DEBRIS
TO ENTER TRANSMISSION.
1. Disconnect HYDRAULIC PRESSURE HOSE 2 from
PUMP ASSY 8CC (Fig.18).
2. Remove OLD AUX. PUMP UNIT and PUMP ASSY
8CC from TRANSMISSION.
(1) OLD AUX. PUMP UNIT
(2) PUMP ASSY 8CC
(3) STUD BOLT x 2
(4) HEX. NUT x 2
(5) PRESSURE HOSE 2
(6) TRANSMISSION
(7) STRAIGHT PINs x 2
Publicité
