Publicité
Les langues disponibles
Les langues disponibles
14
12. Tighten TIE CABLEs so the HOSEs don't shift.
* After Re-assembly
(1) HYDRAULIC HOSE 1
(2) 1/4" NIPPLE 72N4-4F
(3) 1/4" DUST CAP (72PDC-4W)
(4) ADAPTER (6CTX-S)
(5) ADAPTER 2
(6) TIE CABLE x 2
[6] AUXILIARY VALVE
1. Remove VALVE CABLE and VALVE ARM (1) from
OLD VALVE ASSY. (Fig.22)
2. Remove
BRACKET
CLAMP
CUSHION (4) and four FLANGE BOLTs. (5)
3. Remove HYDRAULIC PRESSURE HOSE 1 (6) at
PUMP side.
4. Remove OLD VALVE ASSY and OLD BRACKET from
vehicle.
(1) VALVE ARM
(2) OLD VALVE ASSY
(3) BRACKET CLAMP
(4) CLAMP CUSHION
(5) FLANGE BOLTs x 4
(6) HYDRAULIC PRESSURE HOSE 1
(7) OLD BRACKET
5. Disconnect VALVE CABLE ASSY from LIFT LEVER
and remove OLD STAY. (Fig.23)
(1) VALVE CABLE ASSY
(2) LIFT LEVER
(3) OLD STAY
(3)
and
CLAMP
Publicité
