Ritter icaro5 Mode D'emploi page 17

Trancheuse universelle
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
English
Risk of electric shock
– Always remove the power plug
from the socket in the event of
a malfunction, before cleaning
and when the appliance is not
in use. When doing so, pull on
the plug and not on the cable.
– Never immerse the appliance
in water. Never expose the
appliance to rain or any other
form of moisture. If the appli­
ance falls into water, unplug the
cable from the mains socket
before removing the appliance
from the water. Have the appli­
ance inspected at an author­
ized service location before
using it again.
– Always ensure that your hands
are completely dry before using
the appliance. Do not use the
appliance if it is wet or damp
or while you are standing on a
damp surface. Do not use the
appliance outdoors.
– Stop using the appliance
immediately if any parts are
damaged and contact the ritter
after­sales service.
– If the power cord is damaged, it
must be replaced by the manu­
facturer, the manufacturer's
after­sales service or a similarly
qualified person to eliminate
risk of personal injury.
10
Risk of injury
– This appliance must not be
used without a slice carriage
or a left­over holder, unless
the size and shape of the food
to be sliced means that these
parts cannot be used.
– Before replacing accessories or
add­on parts that move when
operated, the appliance must
be switched off and discon­
nected from the mains.
– The rotary blade is extremely
sharp.
– Never touch the rotary blade
when operating the appliance!
– Switch the appliance off before
cleaning it; pull the power plug
out of the socket and turn the
slice thickness adjustment knob
to the "0" position.
– The rotary blade will continue
to run for a short time after
being switched off.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Icaro7Elexa5Elexa7

Table des Matières