Function And Operation - Menu System SiNA One Mode D'emploi

3. FUNCTIoN AND opErATIoN

CoNTroL oF INDUCTIoN hoBS
Your SINA induction appliance is operated via the rotary switch
features two rotary switches. The one on the left controls the front hob. The one
on the right controls the rear hob.
You can control the power of your SINA induction appliance in two different ways:
1. power mode
Use the rotary switch to set the required power level. Turn the switch to the
1
right to increase the power – to reduce it, turn the switch to the left.
2. SLIDECONTROL mode (SLC)
Patented and award-winning control technology from MENU SYSTEM.
SLIDECONTROL – for smooth control. You can control the cooking power just by
moving the pan. SLIDECONTROL mode is not available with the SINA Wok.
Slide Control SLC
reduce power
20
2
If you have the
1
SINA Twin model,
please fold out the
5
back cover page.
. The SINA Twin
1
off
Increase power
Switch-on and stand-by
Move the rotary switch away from the off position (red line aligned with status
indicator) to switch on your SINA appliance. The status indicator
display below the cooking surface both start to light up.
3
If there is no pan on the cooking surface or if the appliance is unable to detect the
pan, the status display flashes. The display
2
is in Power mode and «SLC» when it is in SLIDE CONTROL mode. No power is
transmitted because the SINA appliance is on stand-by.
In Power mode, the position of the switch does not affect what is shown on the
display if the appliance is on stand-by.
Stand-by Status indicator flashes
Rotary switch in SLC position: Display shows SLC
Rotary switch in any other position: Display shows 0
Controlling the appliance in power mode
If there is already a pan on the hob when you switch the appliance on or if you
place a pan on the cooking surface while the appliance is on stand-by, power is
4
immediately output to the pan. The power output level depends on the position of
the rotary switch . The status indicator
1
uses 10 levels to indicate the power output. It can display the numbers 1–8 as
3
well as P9 and P10 for the highest power range (power levels).
Turn the switch to the right to increase the power – to reduce it, turn the switch to
the left. The SINA appliance features continuously variable power control. This
means you can control the power very precisely via the rotary switch. The 10-level
display is merely there as a guide to help you.
4
3
1
and the
2
shows «0» when the appliance
3
lights up continuously. The display
2
21