General Information - Menu System SiNA One Mode D'emploi

7. GENErAL INForMATIoN

LIABILITy
The manufacturer's warranty covers all defects in design, production and materials.
All other claims are excluded.
No warranty claims will be accepted in the following cases:
Incorrect operation and use for purposes other than the intended use.
Inadequate work or tampering and the use or installation of non-genuine spare
parts or accessories.
please note:
Do not use the SINA appliance if you notice damage or malfunctions.
If you wear a pacemaker, check with your doctor whether you are allowed near
an induction cooking appliance.
rEpAIrS
Repairs may only be carried out by authorised service personnel.
Contact your dealer, a trained MENU SYSTEM Service Partner or our
customer service department.
You can find your nearest MENU SYSTEM Service Partner on our website
www.menusystem.ch under «Contact». You can contact our customer
service department at:
MENU SySTEM AG Customer Service
Tel.: +41 71 272 51 00
service@menusystem.ch
28
CooKING WITh INDUCTIoN
The induction coil beneath the glass ceramic or wok dish generates an alternating
electromagnetic field that produces heat in the base of an induction cookware
item through the principle of eddy currents. The automatic pan recognition only
switches on the generator when a pan is placed on the appliance.
heat is generated directly
in the base of the pan
Glass ceramic
Inductor (coil) generates
magnetic field
Generator
Induction cooking has many advantages. here are the key ones:
Very high effectiveness of around 95 % = high efficiency =
high cooking capacity = minimal power loss
Ready to use immediately at full power, because electrical energy is
converted instantly into heat in the pan base – no heating-up time!
Very short boiling time with highly sensitive energy metering
Minimal radiation of heat = lowest possible temperature in the kitchen =
optimum working environment and minimal levels of vapour
Optimum hygiene and very easy cleaning
Very low operating costs (energy, cleaning)
Safety electronics for high operating safety (pan recognition,
idle cut-out, overheat protection)
29