Publicité
Les langues disponibles
Les langues disponibles
I N S T A L L A T I O N I N S T R U C T I O N S
GENERAL
This appliance may only be
installed by a certified technician.
ELECTRICAL CONNECTION
230 V AC - 50 Hz
The electrical connection must
comply with national and local
regulations.
The information plate explains the
connection options. This plate is
located at the bottom of the
appliance. The appliance should
always be earthed. It is
recommended that cable type H0
be used. If you
5RR-F5G-1.5 mm
2
want to make a fixed connection,
make sure that a multi-polar
switch with a contact separation
of at least 3 mm is fitted in the
supply line.
OVERALL WATTAGE
HEK4..
6000 W
BUILDING-IN
1. Attach the connection cable.
2. Cut the hole in the counter top
(see installation dimensions on
page 16). The counter must be at
least 28 mm thick.
3. Lower the hob into the hole.
Worktop
28 mm
Fill-up block
Worktop
50 mm
4. Fasten the hob. You can fasten
the fixing clamps against the
underside of the ope-ning.
5. Make the electrical connection.
6. Check to ensure that the
appliance functions properly.
This appliance conforms to current
CE guidelines.
15
Publicité
