Niko 350-34001 Manuel Technique page 12

350-34001/350-34002/350-340X3/350-340X4/350-34902
4.10.2 Automatic / Advanced mode parameters
Parameter
Night mode
Switch-on lux adjustment
(for night mode (0=Always
ON, 2000 lux max)
4.10.3 Constant Light Control / Advanced mode
Parameter
Night mode
Lux level adjustment (for
night mode) (10 – 2000 lux)
Switch-on lux adjustment
(for night mode) (0=Always
ON, 2000 lux max)
12
EN
Description
With this parameter, night mode can be enabled and a second target brightness level can be activated.
Default value: Disable
Disable
Enable
With this parameter, you can activate the switch-on brightness: the detector will switch on when motion is detected and there is not enough brightness.
# lux (0= Always ON, 2000 lux max)
Description
With this parameter, night mode can be enabled and a second target brightness level can be activated.
Disable
Enable
Activate the brightness level setpoint for night mode.
# lux
With this parameter, you can activate the switch-on brightness: the detector will switch on when motion is detected and there is not enough brightness.
# lux (0=Always ON, 2000 lux max)
Only one setpoint can be activated.
A second target brightness level can be activated and you can switch between both values.
# lux (0= Always ON, 2000 lux max)
If the lux level remains below this value, the detector will switch on.
Only one setpoint can be activated.
A second target brightness level can be activated and you can switch between both values.
The second target brightness level is activated for night mode.
If the lux level remains below this value, the detector will switch on.
PM350-34x0x_EN