Scope Of Delivery; Technical Data Multidata Wr3 - Zenner WR3 Notice D'installation Et D'utilisation

Be sure to read the installation and
operating manual before installing.
This allows you to protect yourself

Scope of delivery

Calculator for heat meters multidata WR3
■
Sealing material
■
Wall holder with mounting accessories (in the lower housing)
■
Installation and operating instructions, declaration of conformity
■

Technical data multidata WR3

Temperature range
Temperature difference
range
Display
Display unit
Volume pulse generator can
be connected
Temperature sensor
connection
Max. Sensor cable length
2-wire
Max. sensor cable length
4-wire
Data interfaces
Ambient temperature
Power supply
1
Battery lifespan
Protection class
Mechanical/
electromagnetic class
Measuring accuracy
Measuring cycle time
( ) Possibility for battery replacement is depending on the country, please check the relevant
1
national regulations
and prevent damage. Check the
contents of the packing before
installation to be complete.
°C 0 - 150
K 3 - 120
LCD multifunctional display, 8-digit plus
special characters
Standard: MWh
Optional: kWh, MJ, GJ
Reed switch, open collector or active
Input frequency:
max. 1 Hz for passive transmitters,
max. 100 Hz for active transmitters
PT500
m 12.5
m 20
As standard: Optical data interface,
2 programmable pulse outputs/inputs
optional: M-Bus, RS 485, RS 232
°C 5 - 55
Lithium battery 3.6 V
Optional: Via M-Bus level converter or
plug-in power supply (output: 24 V DC)
At least 5 years + 1 year reserve,
optional 10 years + 1 year reserve
IP 54 / IP 65
M1 / E1
In accordance with DIN EN 1434-1
Standard: 30 seconds
(10 seconds when operating button is
pressed)
For versions with M-Bus interface: 10 seconds
17