Nice One OX4 Instructions Et Avertissements Pour L'installation Et L'utilisation page 3

ENGLISH
WARNINGS
WORKING IN SAFETY!
CAUTION! – For personal safety it is important to
observe these instructions.
CAUTION! – Warning - Important safety instructions:
keep these instructions in a safe place.
CAUTION! – All product installation, connection, pro-
gramming and maintenance operations must be per-
formed exclusively by a qualified and skilled technician.
Observe the following warnings:
– Never make any modifications to part of the product
other than those specified in this manual. Unauthor-
ised operations can be the source of hazards and
malfunctions. The manufacturer declines all liability
for damage caused by makeshift modifications to the
product.
– For cleaning the product surfaces, use a slightly damp (not
wet) cloth. Important – Never use substances containing
alcohol, benzene, diluents or other flammable substances.
Use of such substances could damage the product.
– Keep this manual in a safe place to enable future product
maintenance and programming operations.
– The product packaging material must be disposed of in full
ob servance of current local legislation governing waste dis-
posal.
This device complies with Part 15 of the FCC Rules and with
RSS-210 of Industry Canada. Operation is subject to the fol-
lowing two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation. Any changes or modifications made to this device
without the express permission of the manufacturer may void
the user's authority to operate this device.
1 – PRODUCT DESCRIPTION AND
INTENDED USE
The OX4 / OX4T receiver is part of the NiceOpera System
produced by Nice. It is designed for use in systems for the
automation of gates, garage doors, road barriers, sun awn-
ings, shutters, skylights, and for the control of lights and elec-
trical circuits in general.
Any other use is to be considered improper and is strict-
ly prohibited! The manufacturer declines all liability for
damage resulting from improper use of the product and
other than as specified in this manual.
2 – PRODUCT SPECIFICATIONS
– 4 relays with normally open (NO) and normally closed (NC)
electrical contacts for use with electric power circuits.
– With 3 dip switches: 2 for Timer programming and 1 for
fu tu re use.
EN
1