Nice One OX4 Instructions Et Avertissements Pour L'installation Et L'utilisation page 17

TECHNICAL SPECIFICATIONS OF THE PRODUCT
• Power supply:
• Maximum absorbed current:
• Encoding:
• Frequency:
• Antenna impedance:
• Sensitivity:
• Range:
• Radiated power (OX4T ONLY):
• Capacity of transmitter memory:
• Outputs:
• Contact capacity:
• Maximum BusT4 current:
• Timer times:
• Protection rating:
• Operating temperature:
• Dimensions / weight:
Notes on product technical specifications:
– The operating distance between transmitters and receivers (range) is strongly influenced by other devices working in the area
and at the same frequency (for example: alarm systems, radio earphones etc.). In these cases, Nice cannot provide any guar-
antee as regards the effective capacity of its devices.
– All technical specifications stated herein refer to an ambient temperature of 20° C (± 5° C).
– Nice reserves the right to apply modifications to the product at any time when deemed necessary, maintaining the same
intended use and functionality.
110 ÷ 240 Vac 50/60 Hz
80 mA
O-Code / TTS / FloR (rolling code); or Smilo (rolling code) or Flo.
433.92 MHz
52 ohm
more than 0,5µV for successful signal
estimated at 200 m if in open space or 35 m ins8ide buildings
+2dBm
1024 (maximum)
4 relays with NO and NC contacts, voltage-free
5A - 250V
200 mA
programmable from 2 seconds to 540 minutes
IP44 (with container intact)
-20 ÷ 55 °C
128 x 112 x 43 mm / 260 g
EN
15