Smeg SEFR535X Mode D'emploi page 29

The emulsion zone
The drainage and recovery zone : It is here that all the splashes are
Overheat prevention
The safety thermostat is a second temperature measurement. In the
event of a problem, it automatically cuts off the electric supply to the fryer.
Reconnection is not automatic. It must be carried out manually by a
Smeg-approved engineer (Fig. 2/T.S.).
complete change of the frying bath.
Basket
There are 2 different positions for the fryer basket: one position during use
and another position at rest
whereby the handle does not
remain in the oil. In order to go
from one position to another, you
should unfasten the handle from
its housing and attach it to the
hooks provided for this purpose.
3. Assembly
: With a volume of approximately 5 litres, it allows
emulsions, which are produced with the use of
frozen products or food which is too full of water,
to develop without risk of overflow. The balls of
emulsion are broken up on the edge of the latter
zone, thus avoiding the disasters which the
emulsion of boiling oil might otherwise cause.
recovered which
cooking. This zone, with its sloping curves,
drains all the small drops back into the frying
bath.
sometimes
He must likewise make a
GB
arise during
29