Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Chapter 2 - Installation
Installation of ccu in rack
5. Tighten both the 3 mm dia. screws using the screwdriver to attach the front cover.
6. Place both CCU DT500's side by side.
7. Tighten the six 4 mm dia. screws with the screwdriver from inside the CCU DT500
to the left (power supply unit removed).
allen wrench
8. Place both CCU DT500's in the 19" rack at the required location and attach it using
both lugs.
B1707M00LD
September 2000
2 screws F/90 M3x4
6 screws F/90HC M4x5
THOMSON TTV1707 / CCU DT500
129
User manual
Publicité
Chapitres
Table des Matières
