Publicité
Les langues disponibles
Les langues disponibles
GB
● The spray movement should come from the arm, not just from the wrist. This
ensures that a uniform distance is maintained between the spray gun and the spray
surface during the spray operation (Illus. 4).
● To achieve optimal spray results, spray back and forth over the surface (Illus. 5).
Cleaning and Maintenance
The spray gun can only operate satisfactorily if it is cleaned and preserved
after each use.
Attention! Never immerse the spray gun in liquid when cleaning.
1
Empty out the remaining paint from the container.
2. Put proper thinner in the container and trigger the sprayer for approx. 2 seconds.
3. Pull the main plug out of the socket.
4. Disassemble the spray gun as shown in Illus. 8 (spare parts).
5. Thoroughly clean all soiled parts.
6. Reassemble the parts in reverse order.
7. Put a few drops of oil (e.g. sewing machine oil) in the intake and runback holes
(Illus. 6, arrow). Briefly switch on the spray gun.
Designation
Round spray nozzles for various spray materials:
Very thin spray materials/nozzle size: 0,5
Paint container with cover
Flexible nozzle extension with atomiser
Flexible Nozzle Extension (Illus. 7)
For spraying ceilings, resting objects or hard-to-reach areas e.g. radiators
Pos
Name
1
Suction tube
2
Paint container with cover
3
Nozzle 0,8 mm
4
Locking nut
5
Valve
6
Pump housing
7
Piston spring
8
Piston
9
Nozzle spanner
10
Viscosity measuring cup
14
Accessories W 95
Spare Parts List W 95
(not included in scope of delivery)
W 95
Order No.
0046 894
0414 906
0046 675
Order No.
0413 305
0414 906
0046 903
0413 310
0209 042
0402 704
0199 327
0209 058
Publicité
