Accu-Turn ACCU 3602 Manuel De L'opérateur page 16

D. Peridically replaced the plastic insert inside mount/
demount tool.
E. Lubricate rods of air cylinders with oil as needed.
F. Periodically wash all plastic parts with cold water
and soap or window cleaner.
G. Check the bead breaker pads. Replace if worn.
H. If the machine is equipped with an air filter,
discharge the water every day.
I. If the machine is equipped with an automatic air
lubricator, check the oil level weekly. When adding oil
to the lubricator, disconnect the air supply first, remove
the fill screw 'A', and add oil as needed. Make sure
seals are in place when replacing the cap.
Drain water daily from water separator. Do this by
pulling down the fitting 'B' (Fig.31).
(Fig.31)
WARNING!
USE ONLY OILS FOR AIR DEVICES, DO NOT USE BRAKE
FLUID OR OTHER NON SUGGESTED LUBRICANTS.
Suggested oils for the filter/lubricator unit:
TAMOIL: WHITE MINERAL OIL 15
SHELL: ONDINA OIL 15
BP: ENERGOL WT 3
TOTAL: LOBELIA SB 15
ESSO: MARCOL 82
16
967
Operator's Manual ACCU 3602