Inflating Tube-Type Tires; Mounting And Demounting Motorcycle Tires; Maintenance - Accu-Turn ACCU 3602 Manuel De L'opérateur

5.2 INFLATING TUBE-TYPE TIRES

To inflate the tire unlock the rim and start inflating while
pressing the valve towards the inside (this is necessary
to avoid air pockets forming between tube and the
tire) (Fig.28).
Ensure that the tire is correctly centered on the rim and
complete inflation as described in @ 4.3.A.
(Fig.28)
6.0 MOUNTING
DEMOUNTING MOTORCYCLE
TIRES
To mount and demount motorcycle tires it is necessary
to utilize the optional motorcycle adaptors (4 pieces
#4015099).
The bead-breaking, mounting and demounting
technique is the same as per the car, tubeless or tube-
type tires.
WARNING!
MOTORCYCLE RIMS MUST ALWAYS BE CLAMPED FROM
THE OUTSIDE.
AIR PRESSURE MUST NOT EXCEED 110 PSI (8 BAR) WHEN
CLAMPING MOTORCYCLE RIMS.
IF NECESSARY INSTALL A PRESSURE REGULATION DEVICE
(OPTION #4019671).
ACCU 3602

7.0 MAINTENANCE

WARNING!
BEFORE STARTING ANY MAINTENANCE OPERATION
ENSURE THAT THE MACHINE IS DISCONNECTED FROM THE
AIR AND ELECTRIC SUPPLY.
A. Periodically clean the vertical hexagonal rod with
nonflammable liquid detergent.
After this immediately lubricate with oil (Fig.29).
537
(Fig.29)
B. Periodically clean all moving metal parts and
AND
lubricate with oil.
C. Clean every week the teeth of the clamps with a
wire brush, check the plastic rim protector and replace
it if worn (Fig.30).
(Fig.30)
Operator's Manual
517
346
15