General - Becker Centronic SunWindControl SWC745-II Notice De Montage Et D'utilisation

The SWC745-II is compatible with all receivers in the Becker Centronic range
of control units.
The SWC745-II is already set with the current date and time (CET) on delivery
and controls your sun protection system automatically, depending on sunlight
and wind strength.
Products such as sun protection systems, light controls and remote-con-
trolled sockets can be operated using the 5 transmission channels.
In addition to the 5 individual transmission channels, the SWC745-II also has 1
central transmission channel which operates transmission channels 1-5.
The threshold values and shade times can be individually adjusted for each
channel, allowing up to 5 different extend and retract times or switch-on and
switch-off times to be carried out automatically.
Using the intermediate position setting, 2 different positions per channel can
be called up for sun protection applications and 2 different levels of brightness
per channel for a lighting control ("light scene" control).
Manual operation of the unit is possible at any time.
Please observe these Assembly and Operating Instructions when installing
and setting up the equipment.
Explanation of pictograms
CAUTION
ATTENTION

General

CAUTION indicates a hazardous situation
which, if not avoided, could result in in-
jury.
ATTENTION indicates measures that must
be taken to avoid damage to property.
Denotes user tips and other useful in-
formation.
31 - en