Domo DO7312M Mode D'emploi page 30

DO7312M
At this moment, the temperature control is starting to work.
According to personal needs, you can adjust the temperature control knob to increase
or decrease the room temperature in a clock – wise or anti - clockwise direction as
shown in the figure.
ANTI-FROST FUNCTION
It will keep the surrounding temperature above "Freezing Point". To do this, simply
plug in the power cord, and turn the Temperature Control Knob to the "Snowflake"
position, fear of pipe breakage by ice is evitable.
TOP COVER AND COVERING SENSORS
Even though a warning label "DO NOT COVER" has been placed on the unit, some
users accidentally cover the unit by means of towels, blankets or the like. So, a safety
top cover is placed on the top of heater to give an extra protection for young kids and
babies. Once the covering sensors of the heater sense overheat, power will be cut off.
When the unit temperature falls again, power will be resumed.
CLEANING
Before cleaning, turn off the heater, unplug the power cord and allow the heater to
cool. Do not immerse power cord, plug, or heater in water or other liquid, or pour
water or other liquid over the heater.
Use a vacuum cleaner to remove dust and lint at the metal grill of the heater.
Wipe the heater with a dry cloth to remove dust and a damp cloth (not wet) to clean
off stains. Do not use detergents, abrasive cleaning powder or any kind of polishing
material on the body of the heater, as these can damage the finish.
STORAGE
Store the heater in cool dry location and preferably covered to prevent the dust and
dirt. Or use old packaging to repack the unit.
Unplug the heater and store the mains lead in the storage room at the back panel.
Ensure that the plug does not trail to cool before cleaning.
30