Seca 899 Mode D'emploi Et Garantie page 20

Fitting the wall bracket
The display part is intended for mounting on the wall. Use the mounting material supplied
to do so.
– Screw the wall bracket to the wall as
shown.
Be aware that you have a length of 2 m
of cable between the scale and the dis-
play part.
The cable may not contact the weighing
platform during weighing, as this might
falsify the result.
– Push the display onto the wall bracket.
– If you want to change the location of the
scale, take the display out of the wall
bracket and push it into the bracket on
the weighing platform to transport it.
20