Safety Instructions - Bartscher Panini 1RDIG Mode D'emploi

NOTE
The warning symbol NOTE warns
against material damage.

1.2. Safety instructions

Risk of fatal electric shock!

Too a high mains voltage or incorrect installations may cause electric shock.

Connect the device to an easily accessible power supply socket so that in case of
defect it is possible to immediately disconnect the device from the power supply.

The device may be connected only when the information on the rating plate
correspond with the mains voltage.

The damaged power supply cord can be changed by the manufacturer or qualified
staff only.

Any repairs or housing opening may be carried out by professionals and relevant
workshop only.
Power supply cord and plug

Do not transport the device by holding the power supply cord.

Do not use the device when the power supply cord or plug are visibly damaged or
are broken.

Never allow the power cord to come into contact with heat sources or sharp edges.

Do not bend, pinch or knot the power supply cord.

Always completely unwind the power supply cord.

Never place the device or other objects on the power supply cord.

Always hold of the plug to disconnect the device from the power supply.

Do not connect the device to the multi-socket.
Risk of fatal short-circuit!

Store the device so that it may not fall down to water e. g. in a washbasin or bath
tube.

Never hold of the device if it has fallen into water. In such the case, unplug
immediately.

Never immerse the device in water or other liquids.

Liquids in the device may cause short-circuit.

Use the device in the dry surrounding and indoors only.

When cleaning, unplug the device.

Do not touch the plug with wet hands.
The symbol INFORMATION present
information and guidelines to the user
about the use of the device.
- 21 -