Remote Control - MartinLogan Crescendo Manuel De L'utilisateur

REMOTE CONTROL

STANDBY: This button toggles between on and
standby. To enter standby, press the button for two
seconds (front LED will turn red). If no audio signal is
detected for ten minutes, the speaker will automati-
cally go into standby mode. When the speaker is in
standby mode, press the button once to exit. A new
audio signal will also automatically wake the speak-
er. Please note, if the Auxiliary Input has a cable
plugged into the connection (with or without active
audio content), the speaker will not go into standby
mode automatically and will not stay in standby
mode, even if manually activated.
MUTE: Mutes the volume. A second press will restore
the previous volume setting. Additionally, you can
turn mute off by pressing either of the volume buttons.
When mute is active, the front LED will blink red.
Fig. 3 Remote Control
12
VOL+/VOL–: Adjusts volume level. See the section
titled "VOLUME CONTROL (BY INPUT)."
PREVIOUS TRACK : Skips to the beginning of the
†
current track. Pressing the button twice skips to the
beginning of the previous track.
NEXT TRACK : Skips to the beginning of the next
†
track.
PLAY/PAUSE : Toggles between play or pause.
†
SHUFFLE : Set the current playlist to shuffle randomly.
†
REPEAT : Sets the current track to repeat.
†
BASS MODE – NORMAL: Normal bass levels.
BASS MODE – BASS+: Increases bass output.
INPUT – WIRELESS/ETHERNET: Sets the current
input to receive an audio signal from the local
area network via the Wi-Fi or Ethernet connection
(using AirPlay or DLNA).
INPUT – AUXILIARY: Sets the current input to
receive an audio signal from the auxiliary input via
a digital optical mini Toslink or analog 3.5mm ste-
reo "headphone" style jack connection.
INPUT – BLUETOOTH: Sets the current input to
receive an audio signal from a Bluetooth capable
device that is connected wirelessly to the speaker.
INPUT – USB: Sets the current input to receive an
audio signal from USB input. This input allows
the speaker to work as a dock when compatible
Apple devices are attached.
This button works when a source is connected
†
via AirPlay.