MartinLogan Crescendo Manuel De L'utilisateur page 10

a o
n vervIew of
[CONTINUED] If you are connecting a device which allows volume adjustment (like a digital media player
or cell phone), we recommend the volume on the device not be set to maximum. When the volume is set to
its maximum setting, the amplifier in the external device is likely to introduce elevated distortion into the audio
signal which, in turn, will be passed on to this speaker and further amplified, creating even more distortion.
Ethernet: This cable allows you to physically connect a device to a LAN (local area
Wi-Fi: This connection technology wirelessly connects a device to a LAN (local area
network). When connected to a LAN, audio information can be sent to this speaker using
various protocols (such as AirPlay® or DLNA). If an Ethernet connection is used to connect
to a LAN, there is no need to use a Wi-Fi connection. In some installations a 'hard-wired' Ethernet
connection may prove more desirable than a wireless connection.
Bluetooth: This wireless connection technology allows a wide variety of devices to connect
to an audio output device and stream audio. Bluetooth establishes a connection directly
with an audio output device and does not require either device to be connected to a LAN.
Fig. 2 Front Panel Controls
STANDBY/MUTE
10
c
onnectIons
network). When connected to a LAN, audio information can be sent to this
speaker using various protocols (such as AirPlay® or DLNA). If a wireless
(Wi-Fi) connection is used to connect to a LAN, there is no need to use an
Ethernet connection. However, in some installations, a 'hard-wired' Ethernet
connection may prove more desirable than a wireless connection.
USB: This cable allows you to connect compatible Apple devices and to use the
speaker as a dock and charger. This connection will also charge any non-Apple
devices capable of being charged via a USB connection. This speaker's USB
connection was designed to rapidly charge a variety of devices.
INPUT FRONT LED VOL– VOL+