Sony HT-CT370 Mode D'emploi page 11

One-Touch connection using the Android device with the
NFC function built-in (NFC)
1
Perform steps 1 to 3 of "When using an Android device."
2
After the BLUETOOTH connection display appears on the
Android device, touch the Android device with the N mark of
the Bar Speaker.
When the connection has been established, the lamp (blue) of
the Bar Speaker lights.
Lamp (blue)
3
Operate the system with the display of the Android device.
When using an iPhone/iPod touch
1
Press the  (on/standby) button on the remote control.
The display of the Bar Speaker lights.
2
Press the PAIRING button on the remote control.
The lamp (blue) of the Bar Speaker flashes quickly during
BLUETOOTH pairing.
3
Set the iPhone/iPod touch to pairing mode and select
"SONY:HT-CT370" or "SONY:HT-CT770" from the BLUETOOTH
device list on the iPhone/iPod touch.
When the connection has been established, the lamp (blue) of
the Bar Speaker lights.
4
Search for "SongPal" with the connected iPhone/iPod touch
and download that application.
5
Run "SongPal" then operate the system with the display of
the iPhone/iPod touch.
11
US