Storage And Transport; Function Test And Care - KLS Martin group 90-254-58-10 Mode D'emploi

Monopolar Dental and Full Stainless Steel Electrodes
Instructions for Use
5.6

Storage and transport

Information on minimum and maximum temperature for storage and transportation:
Name
Environmental conditions for storage
and transport
The product should be stored sterile in the packaging and in a way in which it is safeguarded against
contamination.
Any sharp points must not damage the sterile barrier.
5.7

Function test and care

Danger of injury from uninspected instruments or components!
Non-functional or defective instruments and components can endanger the patient or user, as well as
affect the intended function of the instrument.
• Always keep electrosurgical instruments and their components in flawless working order.
• Never use electrosurgical instruments and their components if they are damaged due to improper
handling or transport. Dispose of immediately in case of damage.
• Use of components or accessories by other manufacturers may constitute a source of danger.
Test following reprocessing:
• Inspect the electrodes for breaks, damage to the insulation, other defects, and residual soiling after
every disinfection process.
• Dispose of the electrodes immediately if any defects are identified.
• In case of residual soiling, repeat the cleaning and disinfection.
• Plastic surfaces may discolor when the device is used more frequently. If in doubt, dispose of the items
sooner rather than later.
• Electrodes do not require any care, so no care products should be used.
Carry out the following functional checks before each application:
• Check the "Permitted rated voltages" for the active electrode.
Revision 01
Ambient temperature
Relative humidity
(no condensing moisture!)
Air pressure
-20 °C up to +50 °C
0 – 75%
500 – 1,600 mbar
37