Batavia PROFESSIONAL BT-TL014W Mode D'emploi page 18

English
– Do not leave children alone and
unsupervised when the ladder is
set up.
– Do not stand on the top three
rungs as well as the top bar of
the ladder.
– Do not move the ladder whilst
standing on it.
– Make sure that the ladder is
properly secured when moving it.
– Only climb onto the ladder if you
have set it up using the correct
leaning angle of 75° (inclination
angle 1:4).
CAUTION!
Crushing hazard!
When extending or retracting the
ladder, you can catch or jam your
fingers if you proceed without
caution.
– Take care when extending or
retracting the ladder.
– When retracting the ladder
ensure that your fingers, hands
and arms are at the height of the
actuated unlock keys.
Locking device
With the aid of the locking devices
on the rungs , the individual lad-
5
der sections are locked when you
extend the ladder.
– Always check that all sections
are correctly locked before
climbing the ladder:
18
• The locking device of a section
is locked if the red section next
to both unlock keys
is not visible (see fig. B). If
you apply pressure to the corre-
sponding rung, it cannot be
pushed down.
• The locking device of a section
is not locked if the red section
next to one or both unlock keys
of a rung is visible (see fig.
1
C). If you apply pressure to the
corresponding rung, it can be
pushed down.
– Keep in mind that when you
extend the ladder from the top
down, the individual sections will
only lock when you have
extended the ladder to its full
length.
Angle indicator
(See fig. A)
Make sure the ladder is at the cor-
rect angle (between 65°–75°)
before climbing the ladder.
The angle indicator
tional tool to determine the correct
angle and gives a good indication of
whether the ladder is positioned at
the correct angle. Always check
whether the angle is actually cor-
rect and do not rely solely on the
angle indicator.
of a rung
1
is an addi-
8