switel WTE014 Mode D'emploi page 49

Preparing the Walkie−Talkies for Use
Charging the battery pack
Connect the walkie−talkies as illustrated in the diagram. For safety
reasons, only use the power adapter plug supplied.
Mains power outlet
Before using the walkie−talkies for the first time, charge them for at
least 14 hours. When the walkie−talkies are connected correctly, the
red LEDs light up. They only signal that the connection is correct
and continue to light up even when the battery packs are fully
charged.
The current battery charge status is indicated in the display:
Full
As soon as the indicator flashes in the display and acoustic warning
signals are issued, the battery pack needs to be recharged.
Attaching the belt clip
Slide the belt clip in the guide
from the top until it audibly
snaps into place. To detach the
belt clip, prize the fastening tab
up a little with your fingernail
and slide the belt clip upwards.
Do not charge the walkie−talkies with charging units from
other manufacturers.
Half empty Empty
49