Publicité
Les langues disponibles
Les langues disponibles
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
BACKPACK CONCRETE VIBRATOR
•
To reduce the risk of injury, wear
WARNING
protective gloves and boots when
working with wet concrete.
• Do not use accessories which are not specifically
designed and specified by the tool manufacturer.
Just because the accessory can be attached to your
power tool, it does not assure safe operation.
• Always install flex shaft and head according
to the manufacturer's instructions. Only use
accessories matching the tool coupler.
• Chemical Burn Hazard. Keep coin cell battery
away from children.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
Vibrations per Minute (VPM)
Read operator's manual
Wear personal protective equipment
(PPE) according to the job site
PPE
requirements.
Wear eye protection
Pairing
Cold Start LED
Remote mode
OFF position
ON position
UL Listing for Canada and U.S.
US
C
SPECIFICATIONS
Cat. No. .....................................................MXF371
Battery Type ........................................ MX FUEL™
Charger Type....................................... MX FUEL™
Module/FCC ID ............................ BGM11S/QOQ11
Recommended Ambient
Operating Temperature ...................... 0°F to 125°F
MX FUEL
Li-Ion Battery Packs ............ 72 V DC
TM
Rated VPM ...................................................11,200
MILWAUKEE Flex Shafts and Heads
7' Flex Shaft .........................Cat. No. 48-37-7007
14' Flex Shaft .......................Cat. No. 48-37-7014
1-1/2" Head .........................Cat. No. 48-37-5015
2" Head ................................Cat. No. 48-37-5020
Remote Cat. No. .............................................3701
FCC ID .....................................................P36-3701
IC ......................................................... 25187-3701
Communication Range ............................. Up to 30'
Battery Type..................................................2xAAA
DC Input Volts..................................................3.0 V
3
Publicité
