Weelko F330 Mode D'emploi page 16

MAINTENANCE
Skin scrubber
•
Any oil on the probe must be removed immediately.
•
After use, please clean the probe and keep it probe.
Store it in the probe-protecting sleeve at all time.
•
Store the probe carefully to avoid damaging it.
Ultrasound
•
The ultrasound probes should be cleaned using
clean water (not hot) and a clean, soft cloth and then
chemically sterilized using an appropriate sterilization
uid. Dry the probe carefully after sterilizing and store
it safely in its holder on the trolley in between uses.
Always sterilize the probes again prior to use.
•
Never immerse the probe in any uid!
Galvanic
•
Take care not to damage the probe rollers. Never use
abrasive substances to clean the probe rollers, since
damage to the surface of the roller may scratch the
surface of the skin during treatment; any damaged
areas may also harbor bacteria and make sterilization
more di cult.
•
After treatment, all metal roller parts must be
cleaned, sterilized and dried. Then store them in the
accessory holder to avoid any damage.
Magic gloves & BIO-lifting
•
After each treatment, the magic gloves and the
BIO-lifting handles must be cleaned, sterilized and
properly saved in a dry place.