Network Settings - Technics OTTAVA SC-C500 Manuel D'utilisation

Connections

Network settings

You can stream music from an iOS device (iPhone/iPad/iPod), an Android™ device or a PC (Mac/
Windows) to this unit by using the AirPlay or DLNA feature. ( 32, 36)
To use these features, this unit must join the same network as the AirPlay compatible device or the
DLNA compatible device.
This system can be connected to a router using a LAN cable or built-in Wi-Fi
For a stable connection to the network, a wired LAN connection is recommended.
Note
• If you try to change the network settings immediately after turning on this unit, it may take some time until
the network setup screen is displayed.
• If "Firmware update is available" is displayed after the network connection is set up, the firmware for this
unit is available.
- Refer to "Firmware updates" ( 40) for details on update.
- For the update information, refer to the following website.
www.technics.com/support/firmware/
Wired LAN connection
LAN cable
(not supplied)
1 Disconnect the AC power supply
cord.
2 Connect this unit to a broadband
router, etc. using a LAN cable.
18
(18)
Broadband
router, etc.
.
®
3 Connect the AC power supply cord to
this unit, and press [ ]. ( 17)
• When the connection is established,
" " is displayed.
Note
• While the AC power supply cord is
disconnected, the LAN cable must be
connected or disconnected.
• Use category 7 or above straight LAN cables
(STP) when connecting to peripheral devices.
• Inserting any cable other than a LAN cable in
the LAN port can damage the unit.
• If the LAN cable is disconnected, the network-
related settings return to default. Make the
settings again.
• When a LAN cable is connected, the Wi-Fi
function may be disabled.