Technics OTTAVA SC-C500 Manuel D'utilisation page 13

01 Standby/on switch (
• Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
02 Power indicator
• Blue: The unit is on.
• Red: The unit is in standby mode with the following status.
- Network standby function is available. ( 39)
- Charging an iPhone/iPad/iPod ( 27)
• Off: The unit is in standby mode with no function available.
03 Remote control signal sensor
• Distance: Within approx. 7 m (23 ft) directly in front
• Angle: Approx. 30° left and right
04 [SELECT]/[ ], [
Switch the input source ( 30, 31, 32, 34)/
Basic control buttons ( 24)
• These switches work just by touching the marks. Each time
you touch the switch, there will be a beep sound. ( 38)
05 Display
• Input source, playback status, etc. are displayed. For
details, visit:
www.technics.com/support/
06 USB-A terminal DC 5 V 2.1 A
• Port for iPhone/iPad/iPod and USB devices ( 26, 27)
07 Headphones jack
• When a plug is connected, the speakers do not output
sound.
• Excessive sound pressure from earphones and headphones
can cause hearing loss.
• Listening at full volume for long periods may damage the
user's ears.
08 Adjust volume
• 0 (min) to 100 (max)
09 Top cover ( 24)
10 Optical digital input terminal ( 30)
11 LAN terminal ( 18)
12 USB-B terminal
• For connecting to a PC, etc. ( 31)
13 Speaker output terminals ( 16)
14 AC IN terminal ( ) ( 17)
15 Product identification marking
• The model number is indicated.
16 Wireless LAN antenna ( 19)
17 Speaker input terminals / Product identification
marking
• The terminals are on the bottom surface.
• The model number is indicated.
18 Multi-angled Tweeters
19 Symmetrically Placed Woofers
20 Bass reflex port
)
], [ ], [ ]:
Control reference guide
13
(13)