Technics OTTAVA SC-C500 Manuel D'utilisation page 30

Operations
Using digital audio output device
You can input digital audio signals to this unit and play
back music.
1 Disconnect the AC power supply
cord.
2 Connect this unit and a DVD player
etc.
3 Connect the AC power supply cord to
this unit. ( 17)
4 Press [ ] to turn this unit on.
5 Press [>SELECT<] repeatedly to select
"OPT".
6 Start playback on the connected
device.
Note
• The digital audio input terminals of this unit can
only detect linear PCM signals. For details, refer
to the operating instructions of the device.
- Sampling frequency:
32/44.1/48/88.2/96 kHz
- Number of quantization bits:
16/24 bit
30
(30)
DVD player, etc.
Optical digital audio cable
(not supplied)