Playing Back Cds, Etc; Operations During Playback - Technics OTTAVA SC-C500 Manuel D'utilisation

Masquer les pouces Voir aussi pour OTTAVA SC-C500:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operations
Playing back CDs
Insert the CD for music playback.
• Refer to "Notes on CDs" ( 46) for information about
the discs this unit can play back.
1 Press [ ] to turn this unit on.
2 Press [CD].
3 Open the top cover with a sliding
motion and then insert a CD.
• Place label up and push the center of a CD
until a click is heard.
4 Close the top cover with a sliding
motion.
• This unit cannot play back a CD while the
top cover is open.
5 Press [
].
Note
• Be careful not to get your finger caught in the
top cover when opening/closing it.
• Do not apply too much force to the top
cover when sliding it. Doing so may cause
malfunction.
• Do not leave the top cover open for prolonged
periods of time. This will cause the lens to get
dirty.
• Be careful not to touch the lens with your
fingers.
• The lens lights when the following operations
are performed with no CD inserted. This is not
a malfunction.
- Turn the power on
- Select "CD" as the input source
- Open or close the top cover
24
(24)
Lens

Operations during playback

Stop
Pause
• Press again to restart play.
Skip
Search
• On the unit: touch and
hold [
Viewing
available
[INFO]
information
Repeat playback
"Repeat"
1 Press [MENU].
2 Press [ ], [ ] repeatedly to select
"Repeat" and then press [OK].
3 Press [ ], [ ] to select an item and
then press [OK].
1-Track:
Only plays the selected track. ("1
displayed.)
All:
All tracks are repeated. ("
• Setting is available even when the input source
is switched to "USB" ( 26) or "DMP" ( 32).
] or [
].
" is
" is displayed.)

Publicité

Table des Matières
loading

Table des Matières