Technics SC-C500 Guide De Dépannage

Troubleshooting
Cannot connect to the network.
• If the network is set to be invisible, make the network
visible while you set up the network for this unit or
make a wired LAN connection.
• This system's Wi-Fi security supports WPA2™.
Your wireless router must therefore be WPA2™
compatible. For details on the security supported by
your router and how to change the settings, please
refer to the operating instructions or contact your
internet service provider.
• Make sure that the multicast function on the wireless
router is enabled.
• Depending on the router, WPS button may not work.
Try other methods.
• Check the Wi-Fi signal strength using "Signal Level"
and adjust location of this unit and the wireless
router.
(Settings  P. 36)
Operations using the dedicated app
"Technics Music App"
"Technics Music App" enables you to select a music source and playback equipment,
and create playlists easily and comfortably on the screen of a tablet or smartphone.
• If you're using an iPod touch/iPhone/iPad, download it at the App Store
• If you're using an Android device, download the app at Google Play™.
• For details, visit:
www.technics.com/support/
Note
• On-screen images are illustrative only.
• For a stable connection to the network, a wired LAN connection is recommended.
• If you try to change the network settings immediately after turning on this unit, it may take some time until the network
setup screen is displayed.
• The setting will be cancelled after the set time limit. In that case, try the setting again.
• AirPlay, iPad, iPhone, iPod and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
• App Store is a service mark of Apple Inc.
• Google Play and Android are trademarks of Google Inc.
• The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance
The Wi-Fi Protected Setup™ Identifier mark is a certification mark of Wi-Fi Alliance
"Wi-Fi ® " is a registered trademark of Wi-Fi Alliance
"Wi-Fi Protected Setup™", "WPA™", and "WPA2™" are trademarks of Wi-Fi Alliance
• All other trademarks are trademarks of their respective owners.
4
(English)
Cannot select this system as the
output speakers.
• Make sure that the devices are connected to the same
network as this system.
• Reconnect the devices to the network.
• Turn the wireless router off and then on.
• Turn this unit to standby and on, and then select this
system as the output speakers again.
Refer to the Owner's Manual for details.
"Network settings"  P. 18
"Playing back music files on the DLNA server"
 P. 32
"Using AirPlay"  P. 34
.
®
® .
.
®
.
®