Publicité
Les langues disponibles
Les langues disponibles
The cables must be laid separately from interfering sources, the mini-
mum distance is 20 cm.
The braided screen in the cable is connected to the encoder housing.
Output signals
output A
output B
0 index
The encoder provides digital pulse sequences at the output stages.
The outputs A and B are electrically offset by 90°. Thus the direction of
rotation can be evaluated in the external electronics.
The combined zero index is provided once in a mechanical revolution
of the shaft. In case of power failure it can be used as a reference point
within a revolution.
The inverted output signals are used for external electronics with dif-
ferential voltage input to filter interference.
Installation
Do not hit the shaft, do not use a file or similar tool on the shaft:
This could destroy the unit!
The encoder can be screwed to the angle bracket. The shaft should be
connected using a flexible bellows or spring disc coupling to compen-
sate for shaft displacement and to protect the encoder against dam-
age.
Linear movements can be transformed into a rotational movement
using a measuring wheel or rack and pinion. For mounting the maxi-
mum permissible shaft loads of the encoder must be taken into
account.
8
180° 180°
90°
Publicité
